How much does appliance repair cost?

Most residential appliance repairs run $100 to $650 all-in with parts and labor as of 2026, and the most-cited average for a single-appliance service call is $171 to $250. But "appliance repair" covers everything from a $120 dryer belt to a $1,250-plus refrigerator compressor, so the only honest answer starts with a range and then explains what pushes you to one end of it. Here is where the number actually comes from.

The national range — and why it's a range

Across six pricing sources published in 2025 and 2026, residential appliance repair clusters like this:

• Simple fixes — $100 to $200. A belt, a fuse, a switch, a door seal. One part, fast labor, common availability.
• Mid-range repairs — $200 to $450. A pump, a motor, a heating element, or a control board. More part cost, more labor, sometimes a special order.
• Major sealed-system or structural work — $500 to $1,250-plus. A refrigerator compressor, a washer drum, a double-oven element, a glass cooktop. Complex labor, expensive parts, sometimes welding and a refrigerant recharge.

The reason a single flat number misleads is that the spread between those tiers is driven by the appliance and the scope — not by rounding error. A repair shop quoting a real job has to know the appliance, the failed component, and the brand before the number means anything. Anyone quoting "$347 flat" before they know what broke is guessing.

What moves your quote

Seven drivers explain almost the entire range. In rough order of impact:

• Appliance type and complexity. Refrigerators and sealed-system appliances — compressors, refrigerant lines — cost significantly more than dryers or garbage disposals. This is the single biggest swing.
• Repair scope. A one-part swap (belt, fuse) versus multi-component or sealed-system work (compressor, welding plus a refrigerant recharge) is the largest cost-spread driver within any one appliance.
• Labor market / metro area. Technician rates run from about $50/hr in low-cost rural markets to $125–$175/hr in high-cost metros like New York, Los Angeles, and San Francisco.
• Parts origin and tariffs. 2025–2026 tariffs on China and Mexico imports raised compressor, circuit board, and motor costs 5–20%. OEM parts already cost 30–50% more than aftermarket equivalents.
• Brand and parts availability. Common brands (Whirlpool, GE) have cheaper, faster parts; premium or imported brands (Miele, Viking, Bosch) carry parts premiums of 30–80%.
• Appliance age and fuel type. Parts for units 10-plus years old are scarce and expensive, sometimes special-order or refurbished. Gas appliance repairs average about 20% more than equivalent electric repairs because of gas-line and safety-certification requirements.
• Urgency and scheduling. After-hours, weekend, and holiday service adds $50–$110 above standard rates, with holiday premiums of 50–100%. Peak demand seasons push prices up 10–15%.

One newer driver worth flagging: smart, Wi-Fi-connected appliances report 87 problems per 100 units versus 63 for standard units, and their control-board failures are both more frequent and more expensive — boards run $80 to $840 depending on brand.

What it costs to fix specific appliances

These are verified 2026 all-in bands that include the diagnostic and labor.

Dryers

• Belt replacement: $100–$200 — the most common dryer fix.
• Heating element: $150–$300.
• Thermal fuse: $75–$150.

Washers

• Pump or lid switch: $150–$250.
• Drum bearing or motor: $200–$400.
• Control board: $200–$400 — higher on connected models.

Dishwashers

• Pump or spray arm: $150–$300.
• Door latch or heating element: $100–$200.

Refrigerators

• Thermostat or defrost timer: $150–$250.
• Evaporator or condenser fan motor: $200–$400.
• Ice maker: $150–$350.
• Control board: $200–$840 depending on brand.
• Compressor (sealed system, includes welding + refrigerant recharge): $700–$1,250+ — the most expensive common appliance repair.

Ovens, ranges, and cooktops

• Electric heating element: $150–$300.
• Gas igniter: $150–$250.
• Control board or thermostat: $200–$400.
• Glass cooktop replacement: $400–$600+ — the glass alone is $150–$350 plus labor.

Microwaves and disposals

• Microwave magnetron or door switch: $150–$300.
• Garbage disposal repair: $100–$250; a full replacement runs $150–$350.

On top of any of these, expect a diagnostic or service-call fee of $50–$100 (refrigerator diagnostics are sometimes $99), often waived or credited toward the repair if you approve the work. Rural or distance jobs may add a $25–$100 travel charge.

When it costs more — and when it costs less

Two homes with the same broken appliance can get very different quotes. You'll pay more when:

• The appliance is a refrigerator or another sealed-system unit, especially a compressor job.
• You own a premium or imported brand (Miele, Viking, Bosch) — parts premiums of 30–80% are normal.
• The unit is gas (about 20% over electric) or 10-plus years old (scarce, special-order parts).
• You need after-hours, weekend, or holiday service, or you're calling during peak season.
• You live in a high-cost metro where technician labor runs $125–$175/hr.

You'll pay less when:

• It's a single-part swap — belt, fuse, switch, seal — on a dryer, disposal, or other simple appliance.
• You own a common brand (Whirlpool, GE) with cheap, in-stock parts.
• You accept an aftermarket part instead of OEM (30–50% cheaper).
• You can schedule during standard hours and a normal season.
• You're in a lower-cost market where labor runs $50–$75/hr.

Regional and market differences

Regional labor differences are the single largest driver of geographic spread; parts costs are largely national except where supply-chain delays add shipping premiums in remote markets. As of 2026:

• High-cost metros (New York, Los Angeles, San Francisco): all-in service calls average $300–$500+, with labor at $100–$175/hr. NYC-area averages are cited at $314–$327 per job; LA at around $300, with a $180–$500 range.
• Mid-tier metros (Chicago, Atlanta, Dallas): $200–$350 typical. Chicago independent contractors run $80–$115/hr.
• Sun Belt and Midwest (Oklahoma City, Jacksonville, mid-size Midwest cities): $150–$280 typical; Florida shops cite $150–$300 for most single-appliance jobs.
• Rural markets: labor can drop to $40–$75/hr, but technician availability is limited and travel fees of $25–$100 offset some of the savings.

One climate note: coastal and high-humidity regions — Florida, the Gulf Coast, the Southeast — see accelerated corrosion that degrades appliances one to three years faster than the national average, which raises both repair frequency and complexity over a unit's life.

Repair or replace?

The working rule most technicians use: repair when the fix costs less than half the price of a comparable new unit, and lean toward replacement when it approaches or exceeds that. A $150 dryer belt or a $200 washer pump is almost always worth fixing. A $700–$1,250-plus refrigerator compressor on a unit that's 10 or more years old is the classic replace candidate — older-appliance parts are scarce and expensive, and the rest of the machine is near the end of its life anyway. Age, brand, and any recent prior failures all weigh into the call.

How shops quote and collect appliance repair

Once you've set fair prices, the job is still to quote them cleanly, get a yes, and collect — ideally before the truck leaves. Claver for appliance repair lets you build a flat-rate pricebook for common jobs, send a clear quote from the customer's kitchen, take a deposit on a special-order part, and invoice and collect by card or ACH on the spot. Customers can even book online and pay through financing on larger jobs. Claver starts at $19/mo flat, month-to-month. See how it fits on the appliance repair page, or browse more pricing breakdowns in the guides hub.